Utile U2000A Gas Booster and Exhauster
Single stage centrifugal gas booster and exhauster with a stainless steel anti-surge impeller. 50 to 1,600 m³/hr and up to 120 mbar.
At a glance: The U2000A is a single stage centrifugal gas booster and exhauster, or two stage when two machines are combined. It delivers 50 to 1,600 m³/hr at up to 120 mbar, with vacuums to 80 mbar. It is supplied bare shaft, as a basic unit, or as a package with mechanical and electrical protection fitted and wired to IGEM/UP/2, including inverter control and multiple sets for standby or assist. Hurll Nu-Way supplies, installs, and services Utile Engineering gas boosters in Australia.
Heavy duty boosting for natural gas and biogas
The U2000A is a single stage centrifugal gas booster and exhauster, or two stage when two machines are combined. It delivers 50 to 1,600 m³/hr at up to 120 mbar, with vacuums to 80 mbar.
It has a cast iron bearing housing, aluminium volute casing, and a welded stainless steel anti-surge impeller, with a stainless steel shaft and mechanical shaft seal. The shaft is sealed to isolate the bearings when boosting natural gas, landfill gas, or biogas.
It is supplied bare shaft, as a basic unit, or as a package with mechanical and electrical protection fitted and wired to IGEM/UP/2, including inverter control and multiple sets for standby or assist. Utile Engineering is a British manufacturer of blowers, compressors, and gas boosters.
Key advantages
- Stainless steel anti-surge impeller
- Stainless steel shaft and mechanical seal
- Oil free, low noise, vibration free
- Six outlet orientations
- Standby or assist sets
- ATEX Zone 1 compliant options
Utile U2000A specifications
- Flow 50 to 1,600 m³/hr
- Pressure Up to 120 mbar
- Vacuum To 80 mbar
- Stages Single, or two stage with two machines
- Materials Cast iron bearing housing, aluminium volute, stainless steel impeller and shaft
- Controls Pressure switches, control panel, inverter control
- Gases Air, natural gas, biogas, landfill gas, and some corrosive gases
- Compliance IGEM/UP/2, ATEX, BS EN 8487
Need figures for a specific model? Ask our engineers or call 1300 556 380.
Utile U2000A brochure and manuals
The current Utile U2000A brochure and manuals from Utile Engineering.
Utile U2000A 2 documents
Spare parts and service
Gas booster spare parts
Spare parts for the Utile U2000A, sourced through Utile Engineering. Ask us for part numbers and lead times.
Shop gas booster sparesInstallation, commissioning, and servicing
Our technicians install, commission, and service gas boosters, so your Utile U2000A keeps the gas supply steady.
Book a site serviceUtile U2000A FAQs
What flow and pressure does the Utile U2000A give?
50 to 1,600 m³/hr at up to 120 mbar, with vacuums to 80 mbar.
What is the U2000A impeller made of?
Welded stainless steel, with an anti-surge design. The shaft is also stainless steel.
Can two U2000A boosters work together?
Yes. Two machines can run as a two stage set, and multiple sets can be packaged for standby or assist duty.
Who supplies Utile Engineering gas boosters in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies, installs, commissions, and services Utile Engineering gas boosters. Call 1300 556 380.
Page last updated October 2026.
Not sure which gas booster you need?
Tell us the gas, the flow, and the inlet and outlet pressure you need, and our engineers will size a booster for you.