Utile 700A Gas Booster and Blower
Robust single stage centrifugal gas booster, blower, and exhauster, built to run continuously at full load. Up to 450 m³/hr and 70 mbar.
At a glance: The 700A is a single stage centrifugal gas booster, blower, and exhauster that delivers up to 450 m³/hr at up to 70 mbar. Motors range from 0.37 to 2.2 kW. It comes as a basic unit or as a package with pressure switches and a wired control panel to IGEM/UP/2, with duty and standby sets, enclosures, and zone rated motors available. Hurll Nu-Way supplies, installs, and services Utile Engineering gas boosters in Australia.
Single stage booster for steady duty
The 700A is a single stage centrifugal gas booster, blower, and exhauster that delivers up to 450 m³/hr at up to 70 mbar. Motors range from 0.37 to 2.2 kW.
It has a cast iron bearing housing with an aluminium volute casing and impeller, and the shaft is sealed to isolate the bearings. It is built to run continuously under full load.
It comes as a basic unit or as a package with pressure switches and a wired control panel to IGEM/UP/2, with duty and standby sets, enclosures, and zone rated motors available. Utile Engineering is a British manufacturer of blowers, compressors, and gas boosters.
Key advantages
- Runs continuously at full load
- Cast iron bearing housing
- Sealed shaft protects the bearings
- Duty and standby sets available
- Acoustic and weatherproof enclosures
- ATEX Zone 1 compliant options
Utile 700A specifications
- Flow Up to 450 m³/hr
- Pressure Up to 70 mbar
- Vacuum To 70 mbar
- Motor 0.37 to 2.2 kW
- Connections 65 mm inlet, 50 mm outlet (PN6 flanges)
- Design Single stage centrifugal, aluminium volute and impeller
- Gases Air, natural gas, biogas, landfill gas, and many other gases
- Compliance IGEM/UP/2, ATEX 2014/34/EU, BS EN 8487
Need figures for a specific model? Ask our engineers or call 1300 556 380.
Utile 700A brochure and manuals
The current Utile 700A brochure and manuals from Utile Engineering.
Utile 700A 2 documents
Spare parts and service
Gas booster spare parts
Spare parts for the Utile 700A, sourced through Utile Engineering. Ask us for part numbers and lead times.
Shop gas booster sparesInstallation, commissioning, and servicing
Our technicians install, commission, and service gas boosters, so your Utile 700A keeps the gas supply steady.
Book a site serviceUtile 700A FAQs
What flow and pressure does the Utile 700A give?
Up to 450 m³/hr and up to 70 mbar.
What motor sizes are available for the 700A?
0.37 kW to 2.2 kW, chosen to suit the duty.
Is the 700A available as a package?
Yes. It comes as a basic unit or as a package with pressure switches and a wired control panel to IGEM/UP/2, including duty and standby sets.
Who supplies Utile Engineering gas boosters in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies, installs, commissions, and services Utile Engineering gas boosters. Call 1300 556 380.
Page last updated October 2026.
Not sure which gas booster you need?
Tell us the gas, the flow, and the inlet and outlet pressure you need, and our engineers will size a booster for you.