Utile 90-220 Series Multi-Stage Gas Booster
Multi-stage centrifugal machines that work as gas boosters, blowers, or exhausters. Up to eight stages for high pressures and large flows.
At a glance: The 90-220 Series is built with up to eight stages, so it handles volumes from 50 to 5,000 m³/hr, pressures up to 1,030 mbar, and vacuums to 770 mbar. For aggressive gases it can have treated internals, a stainless steel shaft, and gas seals. Hurll Nu-Way supplies, installs, and services Utile Engineering gas boosters in Australia.
High pressure, multi-stage centrifugal boosting
The 90-220 Series is built with up to eight stages, so it handles volumes from 50 to 5,000 m³/hr, pressures up to 1,030 mbar, and vacuums to 770 mbar.
It runs continuously, even under high turndown, and moves gas free from oil contamination without surge. Aluminium impellers with backward curved vanes are precision balanced for low torque and vibration, and the only routine maintenance is re-greasing the bearings.
For aggressive gases it can have treated internals, a stainless steel shaft, and gas seals. It is supplied bare shaft, as a motorised unit, or as a complete package, with zone rated motors for ATEX compliance. Utile Engineering is a British manufacturer of blowers, compressors, and gas boosters.
Key advantages
- Up to eight stages
- Oil free, pulsation free gas
- Runs without surge
- Low noise and vibration
- Stainless steel shaft and gas seals available
- ATEX Zone 1 compliant options
Utile 90-220 Series specifications
- Flow 50 to 5,000 m³/hr
- Pressure Up to 1,030 mbar
- Vacuum To 770 mbar
- Design Multi-stage centrifugal, aluminium impellers and casings
- Drive Baseplate mounted, vee belt driven
- Gases Air, natural gas, biogas, landfill gas, and some corrosive gases
- Compliance ATEX Zone 1 options, packaged to IGEM/UP/2
Need figures for a specific model? Ask our engineers or call 1300 556 380.
Utile 90-220 Series brochure and manuals
The current Utile 90-220 Series brochure and manuals from Utile Engineering.
Spare parts and service
Gas booster spare parts
Spare parts for the Utile 90-220 Series, sourced through Utile Engineering. Ask us for part numbers and lead times.
Shop gas booster sparesInstallation, commissioning, and servicing
Our technicians install, commission, and service gas boosters, so your Utile 90-220 Series keeps the gas supply steady.
Book a site serviceUtile 90-220 Series FAQs
What flow and pressure does the Utile 90-220 Series cover?
50 to 5,000 m³/hr, with pressures up to 1,030 mbar and vacuums to 770 mbar, depending on the number of stages.
Can the 90-220 Series work as a blower or vacuum pump?
Yes. The same machines work as gas boosters, air blowers, and exhausters, and are used in central vacuum systems.
What gases can it handle?
Air, natural gas, biogas, landfill gas, and certain other corrosive and non-corrosive gases.
Who supplies Utile Engineering gas boosters in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies, installs, commissions, and services Utile Engineering gas boosters. Call 1300 556 380.
Page last updated October 2026.
Not sure which gas booster you need?
Tell us the gas, the flow, and the inlet and outlet pressure you need, and our engineers will size a booster for you.