Osby Parca PB2L Solid Fuel Boiler
Biomass boilers from 350 to 995 kW for pellets, briquettes, or dry wood chips. Automatic sweeping and ash removal keep efficiency up and labour down.
At a glance: The Osby Parca PB2L is a biomass boiler from 350 to 995 kW that burns pellets, briquettes, or dry wood chips at approximately 94% efficiency. Automatic hydraulic sweeping of its standing flue tubes and automatic ash removal mean the plant normally only shuts down in summer. Hurll Nu-Way supplies, commissions, and services Osby Parca boilers in Australia.
Biomass heat that looks after itself
The PB2L burns pellets, briquettes, or dry wood chips on a horizontal scraping grate that moves the fuel forward as it burns. Keeping the fuel bed moving limits slag, and any slag that forms leaves with the ash through the internal ash auger.
The flue tubes stand upright and are swept automatically by a hydraulic system, so efficiency stays high through the season. With continuous sweeping, the plant normally only needs to shut down in summer, which cuts labour and the cost of backup fuel. An automatic ash removal system is included.
The PB2L is the smaller version of Osby Parca's PB2, with a slightly simpler control system that is still flexible and easy to use. Osby Parca has built boilers in Osby, Sweden, since 1935.
Key advantages
- Pellets, briquettes, or dry wood chips
- Approx. 94% efficiency
- Automatic hydraulic flue tube sweeping
- Automatic ash removal included
- Moving grate limits slag
- Low emissions
Osby Parca PB2L specifications
- Output 350 to 995 kW
- Fuel Pellets, briquettes, or dry wood chips
- Efficiency Approx. 94%
- Grate Horizontal scraping grate
- Flue tubes Standing, with automatic hydraulic sweeping
- Ash handling Automatic, via internal ash auger
Models in the Osby Parca PB2L
| Model | Documents |
|---|---|
| PB2L | Ask us |
Need figures for a specific model? Ask our engineers or call 1300 556 380.
Osby Parca PB2L datasheets and manuals
Datasheets and manuals for the Osby Parca PB2L are available on request. Ask our engineers or call 1300 556 380.
Spare parts and service
Boiler spare parts
Spare parts for the Osby Parca PB2L, sourced through Osby Parca. Send us the boiler serial number for part numbers and lead times.
Ask about spare partsCommissioning and boiler service
Our technicians commission new boilers and service existing ones, including burners, controls, and water treatment checks.
Book a boiler serviceOsby Parca PB2L FAQs
What fuels can the PB2L burn?
Pellets, briquettes, or dry wood chips.
What output does the PB2L cover?
350 to 995 kW. For larger outputs, Osby Parca's PB2 is the bigger version.
How much maintenance does it need?
Less than most solid fuel boilers. The flue tubes are swept automatically and ash is removed automatically, so the plant normally only shuts down in summer.
What is the difference between the PB2L and the PB2?
The PB2L is the smaller version of the PB2, with a slightly simpler control system.
Where can I get the data sheet?
Call 1300 556 380 or request a quote and we will send the current Osby Parca information.
Who supplies and services Osby Parca boilers in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies Osby Parca boilers and provides installation support, commissioning, servicing, and spare parts sourced through the manufacturer. Call 1300 556 380.
Page last updated October 2026.
Need a boiler sized for your site?
Tell us the heat or steam load, the energy you have on site, and the space, and our engineers will recommend the right boiler.
