ECOTHERM Electric Steam and Clean Steam Boiler
Skid-mounted electric steam boilers and clean steam generators, supplied with feed water tank, water treatment, and controls. For hospitals and industry where electricity is the energy on hand.
At a glance: The ECOTHERM Electric Steam Boiler makes steam from electricity, from 250 to 10,000 kg/h per boiler and up to 20,000 kg/h in a cascade, at 6, 10, or 16 bar. It is supplied skid mounted with feed water tank, water treatment, and controls, and a clean steam version suits hospitals, food, and pharmaceutical sites. Hurll Nu-Way supplies, commissions, and services ECOTHERM boilers in Australia.
Steam without a gas line or a chimney
ECOTHERM electric steam boilers make steam with an electric heating flange inside the boiler shell. Because there is no burner, the site needs no gas or oil supply and no flue or chimney.
Each unit arrives skid mounted with its feed water tank, water treatment, and control panel, piped and wired at the factory. The panel uses a microprocessor controller with a touch screen and links to building management systems (BMS), and monitors steam output at all times.
The clean steam generator version makes steam for uses where the steam touches the product or the patient, such as sterilising in hospitals, food, and pharmaceutical work. Single units run from 250 to 5,000 kg/h, and cascades reach 10,000 kg/h. ECOTHERM builds its boilers at its own plant in Austria, to the European Pressure Equipment Directive 2014/68/EU or ASME Section VIII Division 1.
Key advantages
- No gas, oil, or chimney needed
- Feed water tank and treatment included
- Factory piped, wired, and skid mounted
- Clean steam version available
- Touch screen control with BMS links
- Mild steel or stainless steel
ECOTHERM Electric Steam Boiler specifications
- Steam output 250 to 10,000 kg/h per boiler, up to 20,000 kg/h in cascade
- Clean steam output 250 to 5,000 kg/h per unit, up to 10,000 kg/h in cascade
- Operating pressure 6, 10, or 16 bar(g) standard
- Power 140 to 5,580 kW at 10 bar
- Supply voltage 3-phase 415 V, or 690 V for 6,000 kg/h and above
- Shell material Mild steel P235GH, or stainless steel 304, 316 Ti, or duplex
- Design code PED 2014/68/EU or ASME VIII Div. 1
Models and variants
| Model | Steam output (kg/h) | Power at 10 bar (kW) |
|---|---|---|
| EESG-250 | 250 | 140 |
| EESG-500 | 500 | 280 |
| EESG-750 | 750 | 420 |
| EESG-1000 | 1,000 | 560 |
| EESG-1500 | 1,500 | 835 |
| EESG-2000 | 2,000 | 1,120 |
| EESG-2500 | 2,500 | 1,395 |
| EESG-3000 | 3,000 | 1,670 |
| EESG-4000 | 4,000 | 2,240 |
| EESG-5000 | 5,000 | 2,790 |
| EESG-6000 | 6,000 | 3,340 |
| EESG-7500 | 7,500 | 4,480 |
| EESG-10000 | 10,000 | 5,580 |
Standard steam boiler models from ECOTHERM's 8a Electric Boilers brochure, rated without feed water preheating. Clean steam generators (EECSG) share the same sizes from 250 to 5,000 kg/h.
ECOTHERM Electric Steam Boiler brochures and manuals
ECOTHERM's current brochures and the operating and maintenance manual for its electric boilers.
Spare parts and service
Boiler spare parts
Spare parts for the ECOTHERM Electric Steam Boiler, sourced through ECOTHERM. Send us the boiler serial number for part numbers and lead times.
Ask about spare partsCommissioning and boiler service
Our technicians commission new boilers and service existing ones, including burners, controls, and water treatment checks.
Book a boiler serviceECOTHERM Electric Steam Boiler FAQs
What steam output do ECOTHERM electric steam boilers cover?
Thirteen standard models from 250 to 10,000 kg/h, drawing 140 to 5,580 kW at 10 bar. Two boilers in a cascade reach 20,000 kg/h.
What is the difference between a steam boiler and a clean steam generator?
A clean steam generator makes steam pure enough to touch the product or patient, for sterilising and similar uses. ECOTHERM's clean steam generators run from 250 to 5,000 kg/h per unit, and up to 10,000 kg/h in a cascade.
What comes with the boiler?
Each unit is skid mounted with its feed water tank, water treatment, and control panel, piped and wired at the factory.
Does an electric steam boiler need a flue?
No. There is no combustion, so no gas or oil supply and no flue or chimney is needed.
What approvals does a boiler need in Australia?
Many boilers are registrable plant under work health and safety law, which can mean design registration and plant registration with your state regulator, depending on the boiler's hazard level. Talk to us early and we will work through what your site needs. Call 1300 556 380.
Who supplies and services ECOTHERM boilers in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies ECOTHERM boilers and provides installation support, commissioning, servicing, and spare parts sourced through the manufacturer. Call 1300 556 380.
Page last updated October 2026.
Need a boiler sized for your site?
Tell us the heat or steam load, the energy you have on site, and the space, and our engineers will recommend the right boiler.
