LTG Tangential Fans TW, TM, TTF (125 to 200 mm)
Mid-size tangential fans with 125 to 200 mm impellers, matched to the width of your machine. Stainless steel TTF versions run to 250°C.
At a glance: LTG TW, TM, and TTF tangential fans use 125 to 200 mm impellers in lengths up to about 1,464 mm, giving an even curtain of air across the full width of a machine. The stainless steel TTF handles gas temperatures from -40°C to 250°C. Hurll Nu-Way supplies LTG tangential fans in Australia through Secomak.
An even air curtain across the whole machine
Tangential fans give a wide, even stream of air along their full length, so the fan can be matched exactly to the width of a machine or conveyor. The air pattern stays the same as the fan gets longer.
The TW series covers 125, 150, and 200 mm impellers in nominal lengths from about 400 mm up to about 1,464 mm. The TM and TM t series use 125 and 150 mm impellers with 2-pole or 4-pole motors. The TTF is a 150 mm high temperature fan in stainless steel for gas temperatures from -40°C to 250°C.
Bearings sit outside the air stream, which protects them in hot duties. LTG is a German manufacturer of tangential fans and process air equipment, based in Stuttgart. Secomak distributes LTG fans in the UK, and Hurll Nu-Way supplies them in Australia.
Key advantages
- Fan width matched to the machine
- Even airflow along the full length
- 2-pole or 4-pole motors (TM)
- Stainless TTF to 250°C
- Bearings outside the air stream
- Made in Germany by LTG
LTG Tangential Fans 125 to 200 mm specifications
- Impeller diameter 125, 150, and 200 mm
- Series TW, TM, TM t, TTF
- Nominal length About 400 mm to 1,464 mm
- Temperature TTF: -40°C to 250°C gas temperature
- Material TTF in stainless steel
- Motors 2-pole or 4-pole (TM)
Models in the LTG Tangential Fans 125 to 200 mm
| Model | Documents |
|---|---|
| LTG TW | 1 document |
| LTG TM / TM t | 1 document |
| LTG TTF | 1 document |
Need figures for a specific model? Ask our engineers or call 1300 556 380.
LTG Tangential Fans 125 to 200 mm datasheets and brochures
LTG's technical brochures, with dimensions and fan curves for each length.
LTG TW 1 document
LTG TM / TM t 1 document
LTG TTF 1 document
Spare parts and service
Blower spare parts
Spare parts for the LTG Tangential Fans 125 to 200 mm, sourced through Secomak. Send us the serial number for part numbers and lead times.
Ask about spare partsBlower overhaul and service
Our technicians overhaul and service industrial blowers on site or in our workshop, and commission new installations.
Book a blower overhaulLTG Tangential Fans 125 to 200 mm FAQs
Which series should I choose?
TW for general duties across the widest range of lengths, TM or TM t where you need a 2-pole or 4-pole motor choice, and TTF for hot gas up to 250°C.
How long can the fan be?
Nominal lengths run from about 400 mm up to about 1,464 mm, depending on the series and impeller size.
Can they run in hot air?
Yes. The stainless steel TTF handles gas temperatures from -40°C to 250°C, with its bearings outside the air stream.
Who makes these fans?
LTG of Stuttgart, Germany. Secomak distributes them, and Hurll Nu-Way supplies them in Australia.
Who supplies LTG tangential fans in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies LTG tangential fans through Secomak. Call 1300 556 380.
Page last updated October 2026.
Need a blower sized for your process?
Tell us the flow, the pressure, the air temperature, and your power supply, and our engineers will recommend the right blower.