LTG Small Tangential Fans GA, TA, TE (25 to 90 mm)
Compact tangential fans with 25 to 90 mm impellers, for cooling or heating inside machinery where space is tight. Air turns through 90° or 180°.
At a glance: LTG small tangential fans have 25 to 90 mm impellers and give a wide, even stream of air in very little space, turning it through 90° or 180°. Types GA, TA, TA t, and TE t cover temperatures up to about 200°C, with AC or 24 V DC motors and a heating element option on the 60 mm type. Hurll Nu-Way supplies LTG tangential fans in Australia through Secomak.
Even airflow for tight spaces
A tangential fan draws air in along the full length of its impeller and blows it out along the full length on the other side, giving a wide, even stream of air with no baffles or vanes. Small LTG tangential fans do this in very little space.
The range covers GA 25, TA 40, TA and TE 60, and TA, TA t, TE t, and GA 90 types, with 25 to 90 mm impellers. Air turns through 90° or 180°, which makes compact layouts possible. The 60 mm type can be supplied with an upstream heating element with several power settings, and 24 V DC and AC motor versions are available.
TA types run from -40°C to about 70°C, TA t types to about 120°C, and TE t types to about 200°C. LTG is a German manufacturer of tangential fans and process air equipment, based in Stuttgart. Secomak distributes LTG fans in the UK, and Hurll Nu-Way supplies them in Australia.
Key advantages
- Wide, even airflow without baffles
- Compact 90° or 180° air routing
- Heating element option (60 mm)
- AC or 24 V DC motors
- Versions up to about 200°C
- Made in Germany by LTG
LTG Tangential Fans 25 to 90 mm specifications
- Impeller diameter 25, 40, 60, and 90 mm
- Types GA, TA, TA t, TE t
- Air routing 90° or 180°
- Temperature TA to about 70°C, TA t to about 120°C, TE t to about 200°C
- Motors AC, or 24 V DC
- Options Heating element on 60 mm types
Models in the LTG Tangential Fans 25 to 90 mm
| Model | Documents |
|---|---|
| LTG GA 25 | Ask us |
| LTG TA 40 | Ask us |
| LTG TA/TE 60 | 1 document |
| LTG TA/TE/GA 90 | 1 document |
Need figures for a specific model? Ask our engineers or call 1300 556 380.
LTG Tangential Fans 25 to 90 mm datasheets and brochures
LTG's technical brochures, with dimensions, fan curves, and wiring.
LTG GA 25 / TA 40 1 document
LTG TA/TE 60 1 document
LTG TA/TE/GA 90 1 document
Spare parts and service
Blower spare parts
Spare parts for the LTG Tangential Fans 25 to 90 mm, sourced through Secomak. Send us the serial number for part numbers and lead times.
Ask about spare partsBlower overhaul and service
Our technicians overhaul and service industrial blowers on site or in our workshop, and commission new installations.
Book a blower overhaulLTG Tangential Fans 25 to 90 mm FAQs
What is a tangential fan?
A fan that draws air in and blows it out along the full length of a long impeller, giving a wide, even curtain of air without baffles or vanes.
What sizes are available?
Impeller diameters of 25, 40, 60, and 90 mm, in GA, TA, TA t, and TE t types.
Can they handle heat?
Yes. TA t types run to about 120°C and TE t types to about 200°C. The 60 mm type can also carry its own heating element.
Who makes these fans?
LTG of Stuttgart, Germany. Secomak distributes them, and Hurll Nu-Way supplies them in Australia.
Who supplies LTG tangential fans in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies LTG tangential fans through Secomak. Call 1300 556 380.
Page last updated October 2026.
Need a blower sized for your process?
Tell us the flow, the pressure, the air temperature, and your power supply, and our engineers will recommend the right blower.