Secomak 587 Turbo/15 High Velocity Blower
A belt-driven high velocity blower giving up to 1,850 m³/h and 186 mbar on a 15 kW three phase motor. For drying, blow-off, and process air where pressure matters.
At a glance: The Secomak 587 Turbo/15 is a belt-driven high velocity blower that delivers up to 1,850 m³/h and up to 186 mbar from a 15 kW three phase motor. It suits air knife drying, blow-off, cooling, and process air, and needs very little maintenance thanks to its sealed bearing assembly. Hurll Nu-Way supplies and services Secomak blowers in Australia.
High pressure air from a compact blower
The Secomak 587 Turbo/15 is a high velocity centrifugal blower: low volume, high pressure air from a compact, belt-driven unit. It delivers up to 1,850 m³/h of air and up to 186 mbar of pressure from a 15 kW three phase motor. It gives the most flow in the 587 Turbo family.
The 587 Turbo is Secomak's most powerful high velocity blower, reaching 186 mbar on an 11 kW or 15 kW motor. The 587 Turbo/15 already gives the most flow and pressure in the 587 Turbo family. For more, step up to a larger Secomak model; our engineers can size it.
The fan chamber is machined from aluminium, and the drive belt and sealed bearing assembly keep maintenance to a minimum. It runs on a 50 Hz or 60 Hz supply. Secomak has built industrial fans and blowers in the UK since 1930, and every blower is hand built and tested before it leaves the factory.
Key advantages
- Belt drive with sealed bearing assembly
- Fan chamber machined from aluminium
- High pressure from a compact footprint
- Very low maintenance
- Runs on 50 Hz or 60 Hz
- Hand built and tested in the UK
Secomak 587 Turbo/15 specifications
- Peak flow 1,850 m³/h
- Peak pressure 186 mbar
- Motor 15 kW
- Power supply 415 V three phase (rated 380 to 480 V), 50 or 60 Hz
- Run current 23.1 A
- Weight 210 kg
- Noise level 85 dB(A) at 1 m
- Drive Belt drive, sealed bearing assembly
Compare the 587 Turbo family
| Model | Peak flow (m³/h) | Peak pressure (mbar) | Motor (kW) |
|---|---|---|---|
| 587 Turbo/11 | 1,330 | 186 | 11 |
| 587 Turbo/15 | 1,850 | 186 | 15 |
Figures from Secomak. Peak flow and peak pressure are the two ends of each model's performance curve, not a single duty point.
Secomak 587 Turbo/15 datasheets and brochures
Secomak's current datasheet for the 587 Turbo/15, with the performance curve and dimensional drawing.
Secomak Model 587 Turbo/15 1 document
Spare parts and service
Blower spare parts
Bearing assemblies, belts, impellers, and motors for the Secomak 587 Turbo/15, sourced through Secomak. Send us the serial number for part numbers and lead times.
Ask about spare partsBlower overhaul and service
Our technicians overhaul and service industrial blowers on site or in our workshop, and commission new installations.
Book a blower overhaulSecomak 587 Turbo/15 FAQs
What flow and pressure does the Secomak 587 Turbo/15 give?
Up to 1,850 m³/h of air and up to 186 mbar of pressure. These are the two ends of its performance curve: peak pressure at low flow, and peak flow at lower pressure. The datasheet shows the full curve.
What power supply does the 587 Turbo/15 need?
A 415 V three phase supply (it is rated 380 to 480 V, 50 or 60 Hz), drawing 23.1 A.
How much maintenance does a belt-driven Secomak blower need?
Very little. The bearings are in a sealed assembly, so routine care is checking belt tension and wear. Our technicians can overhaul Secomak blowers when the bearings or belt need replacing.
Who supplies and services Secomak blowers in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies Secomak blowers and gas boosters, and overhauls and services blowers on site or in our workshop. Call 1300 556 380.
Page last updated October 2026.
Need a blower sized for your process?
Tell us the flow, the pressure, the air temperature, and your power supply, and our engineers will recommend the right blower.