Lanemark FDC Gas Burner
Compact packaged gas burners with high turndown, gas only control. Made for process air heating in convection ovens and dryers.
At a glance: The Lanemark FDC is a compact packaged gas burner for convection ovens and dryers, with heat inputs from 9 kW up to 1,550 kW across seven models, from the FD5C to the FD35C. It gives high turndown on gas only control and a short flame from its conical burner head, and runs on natural gas or LPG. Hurll Nu-Way supplies, commissions, and services Lanemark FDC burners in Australia.
Low cost, high turndown oven burner
The FDC is designed to give low cost, high turndown control on gas only, for process air heating in convection ovens and dryers.
It mounts straight onto the wall of a dryer, oven, or air heating duct, firing in line with or at 90° to the airflow. Combustion air and gas mix progressively inside the conical burner head, which gives a short flame and stable combustion over a wide range of process airflows.
Each FDC is packaged with a burner windbox, combustion air fan, manual sliding damper, compact monoblock gas train, and control panel. Lanemark Combustion Engineering is based in Nuneaton, England, and specialises in gas burners for process air heating and tank heating.
Key advantages
- High turndown, gas only control
- Short flame profile for oven design
- Stable combustion from the conical burner head
- Compact packaged design
- Natural gas or LPG (propane)
- Mounts in line with or at 90° to the airflow
Lanemark FDC specifications
- Heat input 9 to 1,550 kW across the range
- Fuel Natural gas or LPG (propane)
- Control On/off, high/low, or modulating (gas only)
- Control signal 4 to 20 mA, 0 to 10 VDC, or 3-wire
- Control voltage 230 V or 110 V
- Fan supply 400 V 3-phase or 230 V single phase
- Flame sensing Flame electrode or UV
Models and variants
| Model | Heat input (kW) | Gas connection |
|---|---|---|
| FD5C | 9 to 117 | ¾" BSP |
| FD5C | 9 to 220 | 1" BSP |
| FD10C | 13 to 350 | 1" BSP |
| FD10C | 13 to 440 | 1½" BSP |
| FD15C | 18 to 660 | 1½" BSP |
| FD20C | 25 to 880 | 2" BSP |
| FD25C | 45 to 1,150 | 2" BSP |
| FD30C | 45 to 1,350 | 2" BSP |
| FD35C | 45 to 1,550 | 2" BSP |
FD5C and FD10C come with two gas connection sizes, each with its own maximum input.
Lanemark FDC datasheet
The current Lanemark FDC datasheet from Lanemark.
FDC 1 datasheet
Spare parts and service
Burner spare parts
Spare parts for the Lanemark FDC, sourced through the manufacturer. Ask us for part numbers and lead times.
Shop burner sparesCommissioning and burner service
Our technicians handle commissioning and ongoing burner servicing, so your Lanemark FDC keeps running at its best.
Book a burner serviceLanemark FDC FAQs
What heat input does the Lanemark FDC cover?
The FDC covers 9 to 1,550 kW across seven models. The FD5C starts at 9 kW and the FD35C reaches 1,550 kW.
What is the difference between the FDC and the FDGA?
The FDC modulates gas only. The FDGA is based on the FDC but adds Lanemark's APL control, which modulates both gas and combustion air to hold the ratio as airflow changes.
What fuels does the FDC run on?
Natural gas or LPG (propane).
What is the Lanemark FDC used for?
Paint pre-treatment dryers, drying and curing ovens, conveyor and batch ovens, textile and fabric dryers, rotary moulding machines, food processing, and powder and grain dryers.
Who supplies and services Lanemark FDC burners in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies Lanemark FDC burners and provides commissioning, burner servicing, and spare parts. Call 1300 556 380.
Page last updated October 2026.
Not sure which Lanemark FDC model you need?
Tell us about your boiler or process and our engineers will size it for you.