Utile 876A Gas Booster and Blower
Robust centrifugal gas booster, blower, and exhauster for larger flows, built to run continuously at full load. Up to 1,200 m³/hr and 125 mbar.
At a glance: The 876A is a centrifugal gas booster, blower, and exhauster that delivers up to 1,200 m³/hr at up to 125 mbar. Motors range from 1.1 to 7.5 kW. It comes as a basic unit or as a package with low pressure switches, isolating valves, and a wired control panel to IGEM/UP/2, with duty and standby sets, enclosures, and zone rated motors available. Hurll Nu-Way supplies, installs, and services Utile Engineering gas boosters in Australia.
Larger flows at higher pressure
The 876A is a centrifugal gas booster, blower, and exhauster that delivers up to 1,200 m³/hr at up to 125 mbar. Motors range from 1.1 to 7.5 kW.
It has a cast iron bearing housing with an aluminium volute casing and impeller, and the shaft is sealed to isolate the bearings. It is built to run continuously under full load.
It comes as a basic unit or as a package with low pressure switches, isolating valves, and a wired control panel to IGEM/UP/2, with duty and standby sets, enclosures, and zone rated motors available. Utile Engineering is a British manufacturer of blowers, compressors, and gas boosters.
Key advantages
- Runs continuously at full load
- Cast iron bearing housing
- Sealed shaft protects the bearings
- Duty and standby sets available
- Acoustic and weatherproof enclosures
- ATEX Zone 1 compliant options
Utile 876A specifications
- Flow Up to 1,200 m³/hr
- Pressure Up to 125 mbar
- Vacuum To 125 mbar
- Motor 1.1 to 7.5 kW
- Outlet 80 mm flange
- Design Single stage centrifugal, aluminium volute and impeller
- Gases Air, natural gas, biogas, landfill gas, and many other gases
- Compliance IGEM/UP/2, ATEX 2014/34/EU, BS EN 8487
Need figures for a specific model? Ask our engineers or call 1300 556 380.
Utile 876A brochure and manuals
The current Utile 876A brochure and manuals from Utile Engineering.
Utile 876A 2 documents
Spare parts and service
Gas booster spare parts
Spare parts for the Utile 876A, sourced through Utile Engineering. Ask us for part numbers and lead times.
Shop gas booster sparesInstallation, commissioning, and servicing
Our technicians install, commission, and service gas boosters, so your Utile 876A keeps the gas supply steady.
Book a site serviceUtile 876A FAQs
What flow and pressure does the Utile 876A give?
Up to 1,200 m³/hr and up to 125 mbar.
What motor sizes are available for the 876A?
1.1 kW to 7.5 kW, chosen to suit the duty.
What comes with a packaged 876A?
Packages can include low pressure switches, isolating valves, flexible connectors, non-return valves, an acoustic enclosure, and a control panel, wired to IGEM/UP/2.
Who supplies Utile Engineering gas boosters in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies, installs, commissions, and services Utile Engineering gas boosters. Call 1300 556 380.
Page last updated October 2026.
Not sure which gas booster you need?
Tell us the gas, the flow, and the inlet and outlet pressure you need, and our engineers will size a booster for you.