Secomak ThermoShrink 750 Shrink Tunnel
An electric hot air shrink tunnel for tamper evident bands, capsule seals, and full body or decorative sleeves. Up to 350 bottles a minute, and it just needs power.
At a glance: An electric hot air shrink tunnel for tamper evident bands, capsule seals, and full body or decorative sleeves. Up to 350 bottles a minute, and it just needs power. Hurll Nu-Way supplies, commissions, and services Secomak equipment in Australia.
Wrinkle-free shrink sleeves with no steam
The ThermoShrink 750 shrinks tamper evident bands, capsule seals, and full body or decorative sleeves using recirculated hot air, so there is no steam supply to install. Directional nozzles spread the heat evenly for a smooth, wrinkle-free finish, at up to 350 bottles a minute for tamper evident bands and 250 for full body sleeves.
Dual PID temperature controllers and thermocouples hold the setting to within 1%, and full hot air recirculation keeps energy use under 8 kW from 12.75 kW installed. Heating elements have burst control and built-in protection for a long life.
The tunnel is built in stainless steel for food, beverage, and pharmaceutical lines, with an integrated control panel: add power and it is ready to run. For higher speeds, see the ThermoShrink 1500. Secomak has designed and built drying equipment in the UK since 1930.
Key advantages
- Hot air, no steam needed
- Wrinkle-free finish
- Temperature within 1%
- Full hot air recirculation
- Stainless steel construction
- Just add power
Secomak ThermoShrink 750 specifications
- Speed Up to 350 bottles/min (tamper evident bands)
- Installed power 12.75 kW
- Energy consumption Under 8 kw
- Power supply 415 V three phase, 50 Hz
- Back-up protection 32 A
- Temperature control PID, accurate to within 1%
- Noise level Under 75 dB(A) at 1 m
- Reliability MTBF 6,624 hours, MTTR 2 hours
Speed by application
| Application | Bottles per minute | Installed power |
|---|---|---|
| Tamper evident band | Up to 350 | 12 kW |
| Capsule seal | Up to 300 | 12 kW |
| Full body sleeve | Up to 250 | 12 kW |
| Decorative sleeve | Up to 200 | 12 kW |
From Secomak's ThermoShrink 750 datasheet.
Secomak ThermoShrink 750 technical specification
Secomak's technical specification, with dimensions and technical data.
Secomak ThermoShrink 750 1 document
Spare parts and service
Spare parts
Spare parts for the Secomak ThermoShrink 750, sourced through Secomak. Send us the serial number for part numbers and lead times.
Ask about spare partsInstallation, commissioning, and service
Our technicians install, commission, and service Secomak line equipment, and can help plan where it fits on your line.
Talk to our service teamSecomak ThermoShrink 750 FAQs
How fast is the ThermoShrink 750?
Up to 350 bottles a minute for tamper evident bands, 300 for capsule seals, 250 for full body sleeves, and 200 for decorative sleeves.
Does it need steam?
No. It uses electrically heated, recirculated hot air. Add power and it is ready to run.
ThermoShrink 750 or 1500?
The 750 suits smaller lines and breweries, up to 350 bottles a minute. The 1500 roughly doubles the heating power, up to 560 bottles a minute.
How accurate is the temperature?
PID controllers and thermocouples hold the set temperature to within 1%.
Who supplies Secomak drying machines in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies Secomak drying, washing, heating, and shrink equipment, and commissions and services it on site. Call 1300 556 380.
Page last updated October 2026.
Need help choosing for your line?
Tell us the containers, the line speed, and what happens next on the line, and our engineers will recommend the right Secomak machine.
