Utile 675A Turbo Gas Booster
Quiet running turbo gas boosters in 1 to 5 stage forms, built to run continuously at full load. Up to 275 m³/hr and 125 mbar.
At a glance: The 675A is a quiet running turbo gas booster available in 1, 2, 3, 4, and 5 stage forms, so the pressure can be matched to the job. It delivers up to 275 m³/hr at up to 125 mbar. It comes as a basic unit with baseplate and motor, or as a package with pressure switches and a wired control panel to IGEM/UP/2. Hurll Nu-Way supplies, installs, and services Utile Engineering gas boosters in Australia.
Compact turbo booster for higher pressures
The 675A is a quiet running turbo gas booster available in 1, 2, 3, 4, and 5 stage forms, so the pressure can be matched to the job. It delivers up to 275 m³/hr at up to 125 mbar.
It has an aluminium housing, interstage casing, and impeller, with the shaft sealed to isolate the bearings. It is built to run continuously under full load.
It comes as a basic unit with baseplate and motor, or as a package with pressure switches and a wired control panel to IGEM/UP/2. Duty and standby sets, acoustic and weatherproof enclosures, and zone rated motors are available. Utile Engineering is a British manufacturer of blowers, compressors, and gas boosters.
Key advantages
- 1 to 5 stages
- Runs continuously at full load
- Quiet, cool running
- Sealed shaft protects the bearings
- Duty and standby sets available
- ATEX Zone 1 compliant options
Utile 675A specifications
- Flow Up to 275 m³/hr
- Pressure Up to 125 mbar
- Vacuum To 125 mbar
- Stages 1 to 5
- Design Centrifugal, aluminium housing, casing, and impeller
- Drive Baseplate mounted, vee belt driven
- Gases Air, natural gas, biogas, landfill gas, and many other gases
- Compliance IGEM/UP/2, ATEX 2014/34/EU, BS EN 8487
Need figures for a specific model? Ask our engineers or call 1300 556 380.
Utile 675A brochure and manuals
The current Utile 675A brochure and manuals from Utile Engineering.
Utile 675A 2 documents
Spare parts and service
Gas booster spare parts
Spare parts for the Utile 675A, sourced through Utile Engineering. Ask us for part numbers and lead times.
Shop gas booster sparesInstallation, commissioning, and servicing
Our technicians install, commission, and service gas boosters, so your Utile 675A keeps the gas supply steady.
Book a site serviceUtile 675A FAQs
What flow and pressure does the Utile 675A give?
Up to 275 m³/hr and up to 125 mbar, depending on the number of stages (1 to 5).
Can the 675A run continuously?
Yes. It is designed to run continuously under full load.
Is the 675A available as a package?
Yes. It comes as a basic unit or as a package with pressure switches and a wired control panel to IGEM/UP/2, including duty and standby sets.
Who supplies Utile Engineering gas boosters in Australia?
Hurll Nu-Way, based in Glen Waverley, Victoria, supplies, installs, commissions, and services Utile Engineering gas boosters. Call 1300 556 380.
Page last updated October 2026.
Not sure which gas booster you need?
Tell us the gas, the flow, and the inlet and outlet pressure you need, and our engineers will size a booster for you.